RC-MODEL

#PREORDER (Deposit )IG3940 INITIAL D Mazda RX-7 Mazda Speed A-spec(FD3S) Yellow Sound & LED Ver.

數量

簡介

+ Description: Brand: Ignition Model Item No.: IG3940 Item: Nismo INITIAL D Mazda RX-7 Mazda Speed A-spec(FD3S) Yellow Sound & LED Ver. Scale: 1/18 Material: Resin Color: Yellow 這款1/18比例的樹脂模型忠實還原了漫畫《頭文字D》第17卷中高橋圭介駕駛的馬自達TRX-7 Speed A-spec (FD3S)。 此版本再現了高橋圭介在「D計畫」初期與ER34首次交鋒時駕駛的RX-7。 這款高級機型新增了諸多機關，例如可開啟的伸縮式頭燈以及逼真的引擎啟動和怠速音效。 油箱蓋同時也是電源開關－按下即可開啟模型。滑動引擎蓋尖端附近的磁棒即可打開頭燈罩。 輕觸引擎蓋上的噴嘴區域即可啟動引擎音效和怠速效果。 注意：即使斷電，也可以透過磁棒打開或關閉頭燈罩。 與之前的模型一樣，這款模型也配備了LED燈——亮度更高。 用磁性棒輕觸引擎蓋前部即可啟動頭燈、尾燈、倒車燈和儀錶板。再次輕觸會觸發危險警告燈閃爍，第三次輕觸則會關閉所有燈光。 充電透過 USB Type-C 介面進行，該介面可透過取下磁吸式後牌照架找到。建議充電約 15 分鐘。 （USB 數據線需另行準備。） 該車配備 MazdaSpeed MS-02 款式的 17 吋輪圈（拋光黑色），車身降低，並配有 MazdaSpeed 前保險桿、後擾流板、紅色煞車卡鉗、大口徑排氣管、RECARO 桶形座椅、四點式安全帶和 MOMO 款式方向盤。 車牌採用漫畫中出現的「白色」設計。 本模型基於真實車輛的全3D掃描數據，並由官方授權方「講談社」進行嚴格審核和監督，以確保外觀和內裝細節的精準還原。 包裝盒採用印有漫畫場景的背景圖案，作為《頭文字D》30週年紀念限定版發售。 TRX-7 Mazda Speed A-spec (FD3S), as driven by Keisuke Takahashi in Volume 17 of the manga Initial D, faithfully reproduced in 1/18 scale using resin material. This version recreates the RX-7 featured in Keisuke’s first battle against the ER34 during the early stages of Project D. This premium model introduces new gimmicks, including openable retractable headlights and realistic engine start-up and idling sounds. The fuel cap serves as the power switch—pressing it turns the model ON. By sliding the included magnetic stick near the tip of the hood, the headlight covers open. Tapping the washer nozzle area of the hood activates the engine sound and idling effect. Note: The headlight covers can be opened or closed via magnetic stick even when the power is OFF. As with previous models, LED lighting is included—now with increased brightness. Touching the front of the hood with the magnetic stick activates the headlights, taillights, reverse lights, and meter panel. A second touch triggers hazard light blinking, and a third touch turns all lights off. Charging is done via a USB Type-C port, accessible by removing the magnetically attached rear license plate. Approx. 15 minutes of charging is recommended. (USB cable not included—please prepare one separately.) The car is equipped with MazdaSpeed MS-02-style 17-inch wheels (polished & black) with a lowered stance, MazdaSpeed front bumper, rear spoiler, red brake calipers, large-diameter muffler, RECARO bucket seats, 4-point harness, and MOMO-style steering wheel. The license plate replicates the “white” design seen in the manga. Based on full 3D scans of the real vehicle, this model has been carefully reviewed and supervised by the official license holder "Kodansha" to ensure accuracy in both exterior and interior details. The packaging features a printed backdrop depicting a manga scene and is released as a 30th Anniversary Limited Edition of Initial D. *Reference image only, details subject to change according to licensor approval. Retail Price 價格：3070.00 港元（HKD） RC-MODEL -———————————————— Online Store” : https://rcmodel.boutir.com/ 門市 : 旺角 廣華街1號 仁安大廈(潮流地域) 地下G6B-G15舖

你可能感興趣的商品